Lynn Rival - Hull, deck and fixtures

Rival 38A, designed by Peter Brett

Back to TOP of page

To go up to the top at any time click on the floating white arrow on the green disc

Lynn Rival's voyages

Visit our blog

Hull, deck and fixtures

Hull below waterline and boottop: GRP. Coppercoat over epoxy resin barrier on stripped gelcoat (2016)
Seacocks: Blakes - 3 new (2016), 4 original with bolts replaced 2009 and greasers fitted. Trudesign galley saltwater inlet (2016). Stainless steel galley outlet incorporating Isotherm cooler (2002)
Topsides: GRP painted with Awlgrip G-line Polyester Urethane (2011)
Deckplan: See drawing below
Deck: 12mm thick non-plantation quarter sawn teak, steam bent, bonded to GRP with modified polymer adhesive, caulked with oxime cure sandable silicone - Boatlife TDS (2011)
Toe rails: non-plantation teak, steam bent (2011)
Coachroof grab rails: non-plantation teak (2011)
Chainplates: Bronze eyebolts for shrouds and inner forestay. Stainless steel for backstay
Stemhead: Original stainless steel fitting (modified to receive self launch bow rollers in 2012)
Stanchion bases: 10 nos. bronze bases
Stanchions: 10 nos. stainless steel 605mm, two each side braced for gate
Guardwire: 5mm stainless steel, plastic coated (2012)
Pulpit: Stainless steel step through (2002)
Pushpit: Stainless steel
Companionway rails: Stainless steel
Sheeting tracks: 4 nos. Lewmar 32mm T tracks through bolted M8 (2012)
Mainsheet track: IYE X track, curved to fit and through bolted
Mooring cleats: 2 nos. 250mm aft, 2 nos. 200mm for'ard, 2 nos. 200mm midships, all aluminium
Fairleads: 2 nos. open aluminium fairleads aft, 2 nos. hawseholes for'ard
Jackstay points: 2 nos. stainless steel U bolts through deck adjacent to cockpit coaming
Tether anchorages: 2 nos. tether anchorages in cockpit
Forehatch: GRP for'ard hinged
Centre Hatch: Bainbridge 'Storm' 18" square (nominal) for'ard hinged (2012)
Main hatch: Sliding. (Perspex replaced 2012)
Escape hatch (aft cabin): Lewmar Ocean 30 18" x 12" (nominal), top hinged (1999)
Portlights: 2 nos. 12" x 6" (nominal)
Anchor well lid: GRP (2012), with teak decking
Cockpit locker lids: GRP. with teak slats/decking
Sprayhood frame: fold down 3 hoop stainless steel frame
Bimini frame: fold back 3 hoop stainless steel frame
Gantry: Stainless steel frame (2007)
Aft pole mount Stainless steel pole for satellite broadband antenna or radar(2012)
Aft platform: Stainless steel frame on Aries mounting tubes
Sheet winches: 2 x Lewmar ST46 (2007); 2 x Lewmar ST30 (peened and chromed 2000)
Liferaft chocks: teak
Dorade ventilators: 2 nos. Vetus Jerry
Deck ventilators: 2 nos. Vetus
Sacrificial anode: MG Duff teardrop
Counterpoise: Guest ground plate
Lynn Rival deck plan

Back to TOP of page

Back to Top